HotSpot Constant Power Programmable LED Emergency Solution with DALI V-1
The HotSpot Constant Power Programmable LED Driver provides programmable, constant power emergency output for existing LED modules. Designed for OEMs, the driver automatically detects the capacity of the attached battery to provide the maximum constant output of the battery for a minimum of 90 minutes. Programmable output capability enables longer emergency runtimes when required. Advanced features include self-diagnostics and detailed data logging. Compliant with CEC Title 20 requirements for battery chargers, required for use in California and Oregon. Five different batteries are available to meet varying runtime and form factor requirements. Compatible with Fulham SmartSet Programming Platform and TPSB-100 handheld controller.
For field-installable Constant Power emergency drivers, click here »
Technical Specifications
- Input Voltage: UNV 120-277VAC
- Input Frequency: 50/60Hz
- Input Current: 0.06A Max
- Output Voltage: 16-55VDC
- Output Power: 1-10W
- Illumination time : Minimum 90 Minutes
- Recharge Time: 24 Hrs
- Communication Mode: DALI V1.0 or Bluetooth w/ supporting Smart Link
- Ambient Temperature: 10ºC – 55ºC
- Battery Type: LiFePO4 9.6VDC / NiCd 9.6VDC
- Battery Recharge Time: LiFePO4: 12 Hours / NiCd: 24 Hours
- RFI/EMI: FCC Part 15A Non-Consumer
- Output Type: Class 2
- Surge Protection: Line-Neutral 2kV, Line & Neutral-Ground 2kV
- Warranty: 5 Years
Programming Guide
Fulham Smartset Programming
The TPSB-100 SmartSet controller gives the user the power to set a number of parameters of compatible WorkHorse LED and HotSpot LED drivers. Fulham’s TPSB-100 is powered via a USB cable that can connect either to a PC or wall power with the included adapter. When used with a PC, Fulham’s SmartSet software provides additional programming ability.
For additional information, please see the links below:
White paper overview of the SmartSet programming system (less than 1MB)
Download TPSB-100 SmartSet Controller User Manual (less than 1MB)
Download Programming Instructions and Design Guide (less than 1MB)
Download SmartSet software (5MB)System requirements:1GHz CPU, 512MB RAM, USB Port 2.0/3.0.Supported Windows OS versions:Windows XP SP2 and above (32 & 64 bit), Windows Vista/Windows 7 (32 & 64 bit), Windows 8 (32 & 64 bit)
Specs and Literature
Brochure
Spec Sheets and Installation Instructions
FHSCP-UNV-10P-L-SD and Batteries
